CL-395-Brick Step Light by Corona Lighting
Material
Brass
Finish
Antique Bronze. Natural toning process. AB finish will vary due to the artistic process
AB-Antique Bronze
Dimensions
8¾"W x 2½" H x ½" D
Faceplate
Diecast brass faceplate with the frosted lens, fitted to a stainless steel backplate.
Housing
Heavy-duty corrosion-resistant cast brass.
Lens
Frosted and heat resistant glass.
Light Source
Integrated LED, 24 single cores, 5 watts, 450 lumens. 3000 kelvin. Operating Voltage: 8-15VAC, 35W halogen equivalent, rated hours: 30,000.
Ambient Temperature: -40° to 124°F. CRI: Ra > 80.
Socket
Two S.C. Bayonet sockets, attached to the aluminum reflector. Halogen socket available.
Wiring
The fixture is prewired with a 25 ft
SPT2-W direct burial cable, pre-stripped for easy connection.
The wire connector is sold separately. Universal Connector (CX-839 ) and Silicone filled wire nut (CX-854) are available from Corona Lighting.
Gasket
Silicone gasket seals the faceplate to housing. Providing weather tight protection.
Mounting
Surface mount slim stainless steel backplate with an integrated LED module. Best used on concrete, brick, or other masonry surfaces.
Two screws and two anchor bolts are provided
Warranty
Limited lifetime warranty on fixture housing and faceplate against manufacturer's defects. Ten (10) year warranty on LED modules and components.
Note
Not for use with an electronic transformer.
Proper greasing and lubrication threaded parts are suggested for installation.
A Remote 12 Volt transformer is required.
Increasing voltage above 12V can decrease the life of LED cores.
