CL-201 Well Light by Corona Lighting
Material
Brass
Stainless Steel
Finish
AB-Antique Bronze.Natural toning process. AB finish will vary due to artistic process.
SS- Stainless Steel
Dimensions
3.78" W x 15.12" L
Housing
Cast brass fixture mounted with stainless steel retention clips inside PVC sleeve
Lens
Clear, tempered, and heat resistant convex glass.
Additional flat glass lens (drive-over rated up to 1,100 Lbs.) included
Socket
Top grade ceramic bi-pin socket with retention clip.
Light Source
12V, MR-16 halogen, 50W max.
L-BAB-C20 (20w) standard.
Wiring
The fixture is prewired with a 3ft 18-2 SJT-W direct burial cord. Wire connectors sold separately.
Silicone-filled wire nut (CX-854) is available through Corona Lighting.
Gasket
Silicone “0†ring seals faceplate to housing providing weather tight protection
Knuckle
Adjustable cast brass knuckle with a thumb screw and ½" NPT threaded male hub on bottom.
Mounting
In-ground direct burial or concrete encasement
Warranty
Limited lifetime warranty on fixture housing against manufacturer’s defects.
LED Options
Base: Bi-Pin, Beam spread: 45° FL
2700k - Rated hours: 50,000
MR-16 3W lumen: 270
MR-16 5W lumen: 300
Note
Lamp operating voltage ranges are:
Halogen: 11-12.5V
LED lamps: 9-17V
Proper greasing and lubrication threaded parts are suggested for installation.
A Remote 12 Volt transformer is required.