CL-247 Step Light by Corona Lighting
Material
Composite
Finish
SS-Stainless Steel
Dimensions
4.78" W x 4.58" L
Housing
Injection-molded composite for high UV stability.
Faceplate
316 marine grade stainless steel fitted to housing with silicone "O" ring gasket.
Lens
Frosted and heat resistant flat glass.
Socket
Top grade adjustable ceramic bi-pin socket with retention clip click to enlarge the image and Teflon-jacketed wire lead.
Light Source
12V, MR-16 halogen, 50W max. L-BAB-C20 (20w) standard.
Wiring
The fixture is prewired with a 3-ft 18-2 SJT-W direct burial cord. Wire connectors sold separately.
Silicone-filled wire nut (CX-854) or quick-locking wire connector (CX-LOC) is available through Corona Lighting.
Gasket
Silicone "0" ring seals faceplate to housing providing weather tight protection.
Mounting Spike
In-ground direct burial or concrete encasement. For best results when mounting in concrete, use the concrete pour kit (CX-237)
Warranty
Limited lifetime warranty on fixture Brass face plate and ten (10) years on housing against manufacturer's defects.
Note
The fixture is supplied with 20W MR-16 lamp
Voltage ranges for the fixture are:
LED lamps: 9-17V
Halogen lamps: 11-12.5V
Proper greasing and lubrication threaded parts are suggested for installation.
A Remote 12 Volt transformer is required.
The Fixture's socket can be tilted ± 25° for adjustable light aiming.
