CL-217 Well Light by Corona Lighting
Material
Composite
Finish
SS-Stainless Steel
Dimensions
4.78" W x 4.58" in L
Faceplate
316 Marine grade stainless steel, fitted to housing with silicone "O" ring gasket
Housing
Injection-molded composite for high UV stability.
Lens
Clear and heat resistant flat glass
Socket
Top grade adjustable ceramic bi-pin socket with retention clip and teflon-jacketed wire lead.
Light Source
12V, MR-16 halogen, 50W max.
L-BAB-C20 (20w) standard.
Wiring
The fixture is prewired with a 3-ft 18-2 SJT-W direct burial cord. Wire connectors sold separately.
Silicone-filled wire nut (CX-854) or quick-locking wire connector (CX-LOC) is available through Corona Lighting.
Gasket
The silicone "O" ring, seals the faceplate to housing, providing weather tight protection.
Mounting Spike
In-ground direct burial or concrete encasement. For best results when mounting in concrete, use the concrete pour kit (CX-237)
Warranty
Limited lifetime warranty on fixture stainless steel faceplate and ten (10) years on housing against manufacturer's defects.
LED Options
Base: Bi-Pin, Beam spread: 45° FL
2700k - Rated hours: 50,000
MR-16 3W lumen: 270
MR-16 5W lumen: 300
Note
Voltage ranges for the fixture are:
LED lamps: 9-17V
Halogen lamps: 11-12.5V
Proper greasing and lubrication of threaded parts is suggested for installation.
A Remote 12 Volt magnetic transformer is required. Not for use with Electronic transformers
See transformers and accessories for variety of options and choices.
